Goggle Care
Proper care and maintenance of your snow goggles are essential for clear vision and longevity. Follow these steps to keep your goggles in top shape:
Inspect for Scratches
Before storing your goggles, carefully inspect the interior and exterior of the lens for major scuffs or blemishes. A scratched lens can be distracting and compromise safety.
Cleaning the Outside Lens
- Shake off excess snow from the lens.
- Blot the lens with a microfiber cloth or the included goggle bag to remove water.
- Once dry, buff the lens with a dry section of the cloth in small circles to ensure cleanliness.
Avoid Wet Cleaning
Never clean wet goggle lenses, as it can rub off the hydrophobic/oleophobic coatings. If the lens has ice, place the goggles inside your jacket to thaw them out.
Inner Lens Care
- Leave the inner lens alone as much as possible.
- Avoid touching or wiping the inner lens to preserve its anti-fog properties.
- Ensure magnetic retentive lenses are wiped dry to prevent rust (this voids warranty).
Heated Goggle Batteries
- Avoid Full Discharge: Try not to let lithium batteries fully discharge. Regularly charging them before they drop below 20% can help maintain their health.
- Regular Checks: If storing for an extended period, check the batteries every three to six months and recharge them if necessary.
- Avoid Overcharging: Do not leave batteries on the charger for extended periods once they are fully charged. Overcharging can lead to overheating and reduce battery life.
- Use Quality Chargers: Always use chargers that are recommended by the battery manufacturer to ensure safe and efficient charging.
Storage
- Store your goggles in a microfiber goggle bag or a protective case.
- Avoid leaving them on your helmet when not in use.
- Keep spare microfiber cloths handy for on-the-mountain cleaning.
Remember, well-maintained goggles enhance safety and visibility out on the trails!
Dos
- Use a microfiber cloth or the pouch your goggles came in.
- Tap off snow and ice instead of rubbing to prevent scratches.
- Allow goggles to fully dry out after each use before storing them.
- Prevent future rust by storing your goggles in a dry place and using a silica gel packet in the case to absorb moisture.
Don’ts
- Never use harsh chemical sprays or solvents.
- Avoid cleaning the lens when wet.
- Don’t use your t-shirt or towels, as they may damage the lens or leave lint.
Rusted magnetic points on snow goggles can occur due to several reasons:
Exposure to Moisture: Snow goggles are often exposed to snow, rain, and sweat, which can introduce moisture to the magnetic points. If the goggles are not dried properly after use, this moisture can lead to rust over time1.
Improper Storage: Storing goggles in a damp environment or without proper ventilation can cause the magnetic points to rust. It’s important to store goggles in a dry place and use a silica gel packet in the case to absorb any residual moisture1.
Salt and Chemicals: Exposure to salt (from sweat or sea air) and certain chemicals can accelerate the rusting process. This is particularly relevant for goggles used in coastal areas or in environments where de-icing chemicals are used2.
Wear and Tear: Over time, the protective coatings on the magnetic points can wear off, making them more susceptible to rust. Regular inspection and maintenance can help identify and address this issue early2.
To prevent rusting, ensure your goggles are thoroughly dried after each use, store them in a dry environment, and avoid exposing them to harsh chemicals or saltwater. Regular maintenance and proper storage can significantly extend the life of your goggles.
By following these tips, you can ensure your goggles remain in excellent condition, providing you with clear vision and reliable performance on the trails and the slopes.